Friday, November 23, 2012

Canon IP1980 Resetter


Perform Full Tank Ink Resetter on IP 1980 is usually the indicator light on the power and resume flashing repeatedly when it happens do the following steps:
  1. Turn on the Canon iP1900
  2. Press and hold the RESUME button for 2 minutes.
  3. Release the Resume button.
  4. The printer will return to normal.
  5. If still not normal too, do the steps for manual reset and Reset Software
For Manual Reset
  1. Printer power cord plugs in a state separated
  2. Press and hold the power button with your index finger and then input power cable
  3. Still hold the power button, then push the middle finger Button resume button twice.
  4. Release the power button
  5. Printer is not blinking
  6. At this stage you have finished making step Manual Reset
  7. For permanent please use the Reset Software.
Do this steps:
  1. Make sure all file attributes from Read Only.
  2. Run GeneralTool.exe GeneralTool iP1900
  3. In USB Port select your printer port.
  4. Click the Lock Release
  5. Select (check) the EEPROM CLEAR
  6. Provide blank paper for printing. Then Click the Test Pattern 1
  7. Finish your IP1900 Printer back to normal.
After the above steps completed. Turn off the printer, if the indicator light is still blinking. Click on the play button and platen.

No comments:

Post a Comment